GE enbrighten LED bulb

Enbrighten Z-Wave Plus Wireless Smart LED Bulb, Dimmable, 60-Watt Equivalent, 2700K Soft White, Works with Amazon Alexa, 35931

../../../_images/enbrighten_smart_led.jpg

Brief information

  • Brightness: 750 lumens (equivalent to 60W incandescent bulb)
  • Power Consumption: 9W
  • Color Temperature: 2700K
    • Replaces standard A type light bulbs
    • Remote ON/OFF and brightness controll via the Z-Wave controller
    • Manual ON/OFF control with light switch (special operation instructions required, see “Manually tunring the light ON or OFF”
    • This Enbrighten LED Smart Bulb has advanced features that allow you to customize your experience. These features can only be adjusted by a Z-Wave enabled controller that supports the Z-Wave Configuration command class — for a complete list of Adjustable Configurations,visit: www.ezzwave.com/config

Specification

  • Power: 120 VAC, 60 Hz, 9W
  • Signal (Frequency): 908.4/916 MHz.
  • Range: Up to 150 feet line of sight between the Wireless Controller and the closest
  • Z-Wave receiver module.
  • Operating Temperature Range: 0-104° F (0-40° C).
  • For indoor use only.
  • Specifications subject to change without notice due to continuing product improvement.

Inclusion/Exclusion to/from a network

  1. Put controller to Inclusion/Exclusion mode
  2. Power OFF then power ON device
  3. Device flashes to indicate process completes

Factory reset

Cycle the wall switch OFF/ON 4 times within 4 seconds (completing one successive OFF and ON action counts as a1 “OFF/ON” cycle.)The bulb will flash 2 times to signify successful reset.

Configuration description

There is no configuration in this device.