Aeotec LED bulb gen5 -------------------------------- Aeotec by Aeon Labs ZW098 Aeon Labs LED Bulb, Small, White ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .. image:: ../../images/dimmable_light/aeotec_led_zw098.jpg .. :align: left Brief information ~~~~~~~~~~~~~~~~~~~~~~~~~~ - Aeon labs LED bulb is a swith multilevel device based in z-wave. - The bulb has 5 main colors: red, green, blue, warm white and cold white - Has repeater role in z-wave mess network - Can be upgrade firmware via OTA Specification ~~~~~~~~~~~~~~~~~~~~~~~~~~~ - Bulb holder type: E26 for US version, E27 for EU/AU version - Max operation power: 9W - Max standby power: 0.7W - Operating temperature: -10 ~ 45 oC - Relative humidity: 8 ~ 80% - Operating range: up to 500 feet/150 meters Inclusion/Exclusion to/from a network ~~~~~~~~~~~~~~~~~~~~~~~ #. LED bulb must be installed with external switch #. Put controller to Inclusion/Exclusion mode #. Turn off then turn on (via external switch), repeat 3 times within 2 seconds #. LED will change its color to indicate include/exclude completes .. image:: ../../images/dimmable_light/aeotec_led_zw098_e.jpg .. :align: left Link in Amazon ~~~~~~~~~~~~~~~~~~~ https://www.amazon.com/Aeotec-Aeon-Labs-ZW098-Small/dp/B00VQISQW4 Configuration description ~~~~~~~~~~~~~~~~~~~~~~~~~~ #. Enable function of using external switch to turn on/off - Parameter: 34 (0x22) - Size: 1 byte - Value: 0x00: enable 0x01: disable - Default: 0x00 #. Enable function of using external switch to change color - Parameter: 35 (0x23) - Size: 1 byte - Value: 0x00: enable 0x01: disable - Default: 0x01 #. Enable to send notification to associated devices (group 1) when LED state is changed - Parameter: 80 (0x50) - Size: 1 byte - Value: 0x00: nothing 0x01: hail CC 0x02: basic CC report - Default: 0x01 - for US version and 0x02 for others #. Lock configuration - Parameter: 252 (0xFC) - Size: 1 byte - Value: 0x00: un-lock configuration 0x01: lock configuration - Default: 0